TECHNICAL DESCRIPTION
Within ALURIS SYSTEM construction program of civil engineering, system H5700 could be considered as one of the most compehensive system, prepared to meet all the actual needs of the market, designers, project engeneers, architects, contractors and buyer who which to seize all the esthetic and funcional adventages of the aluminium constructions.
–IMPLEMENTATION POSSIBILITIES:
This system of aluminum profiles, without thermal bridge, with «EURO-GROOVE» fittings and E.P.D.M. gaskets, is ready to manage any of the following type of construction:
• windows;
• entrance doors, interior doors, with one or more sashes and with possibillity of choosing the direction;
• portals, panel vents…
Aluminum profiles are with soft, orbed edges.
–THE CHARACTERISTICS OF THE SYSTEM:
• Passed aluminum profiles from the Aw6060T 12-15
• Thickness of the profile and tolerance: according to EN 755-9
• Thickness of the filling/glass: from 6-20mm, dependending on glazing bad used.
–MAIN CHARACTERISTICS OF THE SYSTEM:
Group of profiles for windows and door enables manufacturing frames which, from outside, could appear flat or rounded, with overieaf of 5-6 mm between jamb and sash.
Coupling of frames on corners is possible either with a peace of corner joint from pressed anuminium profile embeeded and glued, or with a split corner joint which connects profiles by mean of struts.
